TMK Tees
Printing Techniques By The TMK Tees Team ·

All-Over Print T-Shirts: How Sublimation Works

All-Over Print T-Shirts: How Sublimation Works — key points at a glance
All-Over Print T-Shirts: How Sublimation Works — key points at a glance

Disclosure: some links in this post are affiliate links. TMK Tees may earn a small commission at no extra cost to you.

Over 70% of custom tee buyers never realise that edge-to-edge graphics are physically impossible with standard screen printing. The graphic has to stop somewhere before the seam.

The short answer: all-over printing uses sublimation, a heat-based process where dye turns to gas and bonds permanently into polyester fibres. The result is a full-coverage design with no borders, no raised ink layer, and no white gaps near the seams.

What Actually Happens During Sublimation

The design is printed first onto transfer paper using sublimation inks. A heat press set to around 200 degrees Celsius squeezes paper against the garment for 45 to 60 seconds. At that temperature, the ink skips the liquid stage entirely and converts directly to vapour. The vapour penetrates the polyester fibres and solidifies inside them once the heat is removed. Run your hand over a sublimated tee and the print feels like the fabric itself because it is.

Why Fabric Choice Is Non-Negotiable

Sublimation only bonds with polyester. The minimum workable content is around 65% polyester; 100% polyester gives the sharpest result and the most vivid colour reproduction. Pure cotton blanks, including the popular Fruit of the Loom Valueweight tee, will not hold sublimation dyes at all. The ink has nothing to bond with and simply washes out.

For performance sportswear and festival streetwear, 100% polyester blanks like the AWDis Cool Performance T-Shirt are purpose-built for sublimation runs. The weave is tight enough to hold fine detail.

The Dark Fabric Problem

Sublimation dyes are transparent, not opaque. On white or very light garments, the colours are vivid and accurate to your artwork file. On dark fabrics, the dye disappears into the base colour entirely. Every all-over print design must start from a white or near-white polyester blank. This is a hard constraint, not a preference.

Cost Compared to Screen Printing

Screen printing gets cheaper per unit at volume because the setup cost is spread across the run. Sublimation stays relatively flat per unit because each piece is printed individually. For orders under 50 pieces, all-over sublimation is often the better value. Above 100 units on standard cotton, screen printing wins on price almost every time.

When to Choose All-Over Print

Sportswear, festival kits, and graphic streetwear are the strongest fits. If the design extends across sleeves, wraps around side panels, or bleeds over the shoulder seams, sublimation is the only practical option. Custom polyester hoodies designed for sublimation handle full-body graphics without the seam interruptions you see on standard blanks.

Export artwork at 150 dpi minimum at print size, use an ICC colour profile matched to your printer, and label care instructions clearly on the finished garment: cold wash, inside-out, no tumble dryer. Sublimated prints handled correctly will outlast the garment.


FAQ

Can you do all-over print on a cotton t-shirt?

No. Sublimation dye only bonds with polyester fibres. On cotton, the ink does not adhere and will wash out after one or two washes. You need at least 65% polyester content; 100% polyester gives the best colour.

How long does sublimation printing last?

Sublimated prints are extremely durable because the dye is inside the fibre rather than sitting on top of it. With cold-water washing and no tumble dryer, the colour typically stays vivid for the full lifespan of the garment, often 100 or more washes.

Is all-over print more expensive than screen printing?

For small runs (under 50 units), all-over sublimation is often comparable or cheaper because there are no screen setup fees. For large runs above 100 units on cotton, screen printing is usually more cost-effective.

What file format do I need for an all-over print design?

A high-resolution TIFF or PNG exported at 150 dpi at actual print dimensions is the standard. Some suppliers accept PDF or PSD. Always confirm the exact template size with your printer before finalising artwork, as garment dimensions vary by size.

Can sublimation print go on dark t-shirts?

No. Sublimation inks are transparent, so they have no effect on dark base colours. All-over sublimation is limited to white and very pale garments. For dark custom tees, DTG or screen printing with opaque inks are the correct methods.

Privacy · Terms · Cookies · Affiliate disclosure