TMK Tees

By The TMK Tees Team |

Embroidery vs Print on Custom T-Shirts: Which to Choose

Embroidery vs Print on Custom T-Shirts: Which to Choose — key points at a glance
Embroidery vs Print on Custom T-Shirts: Which to Choose — key points at a glance

Disclosure: some links in this article are affiliate links. TMK Tees may earn a small commission at no extra cost to you.

Embroidery typically costs 40 to 70 per cent more per unit than screen printing on the same shirt. Some brands pay that without hesitation; others never should. The choice is not about prestige. It comes down to fabric weight, logo complexity, and how the finished garment will be washed.

Quick answer For custom t-shirts with detailed, multi-colour artwork, printing delivers better results at a lower cost. Embroidery suits small, bold logos on heavyweight garments such as hoodies, polos, and workwear where a raised, tactile finish is the point.

What each method involves

Printing applies ink or a transfer directly to the fabric surface. Screen printing, DTG (direct-to-garment), and DTF (direct-to-film) all handle fine lines, gradients, and large surface coverage well on standard jersey cotton. A popular blank for custom print runs is the Gildan 5000 Heavy Cotton T-Shirt, which accepts ink cleanly across the full chest and back.

Embroidery stitches thread directly through the fabric. The result is raised and permanent. It will not crack, peel, or fade the way some prints do after repeated washes. The constraint is real: machines struggle with any text below 6mm in height and cannot replicate photorealistic gradients, because thread has a minimum diameter that ink simply does not.

Cost and minimum quantities

A single-colour screen print on a run of 50 shirts typically costs £5 to £8 per unit in the UK. Embroidery on the same run lands closer to £8 to £14, depending on stitch count. A large chest design at 15,000 stitches costs significantly more to run than a standard left-chest logo at 5,000 stitches.

There is also a one-off digitising fee for embroidery, usually £15 to £30, to convert your artwork into a stitch file. Screen printing and DTG each have per-colour setup costs instead. For complex, multi-colour artwork, print setup is almost always cheaper.

For orders under 10 pieces, DTG or DTF almost always makes more financial sense. Ordering a larger run of custom heavyweight hoodies narrows the per-unit cost gap considerably, and an embroidered chest logo becomes much easier to justify at that scale.

Where each method wins

Choose printing when: the artwork spans more than 15cm, includes more than 4 colours, or sits on thin jersey cotton below 180gsm.

Choose embroidery when: the logo is between 5 and 8cm, the garment is a polo shirt, fleece, cap, or heavyweight hoodie, or the finished product will go through industrial laundry cycles. For branded workwear, embroidery's durability through 60-degree commercial washes is often non-negotiable.

Most streetwear drops use printing. Most uniform programmes use embroidery. The overlap between the two is genuinely small. If your brief falls clearly into one camp, there is little reason to second-guess it.

FAQ

Can you embroider a standard cotton t-shirt?

Yes, but results vary. Thin jersey cotton stretches under the embroidery hoop, which can pucker the fabric around the design. A tear-away stabiliser backing reduces this, but heavier fabrics such as pique polo or fleece produce cleaner, more consistent results.

Which lasts longer, embroidery or printing?

Embroidery generally outlasts printing under heavy wash conditions. A quality screen print on a good-weight tee can survive 50 or more washes before visible fading begins. An embroidered logo on the same garment typically shows no degradation until the fabric itself wears out.

Is embroidery worth it for a small logo?

It depends on order size. The digitising fee is fixed at £15 to £30 regardless of logo size. On a run of 100 units, that fee adds pennies per shirt. On a run of 5 units, it dominates the per-unit cost. For very small orders, printing almost always wins on price.

Can I combine embroidery and printing on the same garment?

Yes, and it is a popular approach for branded streetwear. A common combination is a small embroidered chest logo paired with a large back print. Each method handles what it does best, and the contrast between the raised chest logo and the flat back graphic reads as intentional rather than inconsistent.

What file format does embroidery need?

Unlike printing, which accepts high-resolution PNGs or vector files (AI, PDF, EPS), embroidery requires a digitised stitch file in formats such as DST, PES, or EMB. Most UK embroidery suppliers offer a digitising service if you supply standard vector artwork at the point of order.

Related products

Gildan 5000 Heavy Cotton T-Shirt A widely used blank for screen print and DTG runs, available in 60+ colours. View on Amazon
Gildan Heavy Blend Adult Hoodie 280gsm fleece blank, popular for both embroidered chest logos and full-print designs. View on Amazon
Bella + Canvas Unisex Jersey Tee Slim-cut 145gsm blank favoured by streetwear brands for DTG and DTF printing. View on Amazon